Industrial cleaning services in Australia

Published Australian rates for factory, warehouse and industrial cleaning, what the work covers, and how to get comparable quotes.

Industrial cleaning in Australia covers factories, warehouses and processing plants: work that is scoped differently to a standard office or retail clean. Published rates put factory cleaning at $100 to $400 per session and warehouse cleaning at $50 to $300 per session, both typically running 2 to 5 hours, with general industrial cleaning quoted at $100 to $250 per session.

Those figures only mean something next to what the same source publishes for every other type of commercial site it prices, and next to what the work itself actually involves. Both are below.

Source: Spec Services, Commercial Cleaning Cost? (2026 Price Estimates)

Published cost ranges

Type	Published rate	Typical duration
Factory cleaning	$100 to $400 per session	2 to 5 hours
Warehouse cleaning	$50 to $300 per session	2 to 5 hours
Industrial cleaning, general	$100 to $250 per session	Not stated
Office cleaning	$75 to $230 per session	2 to 5 hours
Window cleaning	$30 to $140 per session	1 to 3 hours
Carpet cleaning	$50 to $200 per session	1 to 3 hours
Gym cleaning	$100 to $300 per session	2 to 5 hours
Childcare centre cleaning	$100 to $350 per session	2 to 5 hours

Eight cleaning-cost figures from one Spec Services page: seven come from its per-type table, and the industrial cleaning rate is published separately in the same article. Factory and warehouse sit here alongside office, window, carpet, gym and childcare centre cleaning, not set against a separate figure.

Source: Spec Services, Commercial Cleaning Cost? (2026 Price Estimates)

What industrial cleaning actually covers

Under "What is Included", Merfield Group, a Sydney industrial cleaner, lists nine services. The table below reproduces those nine tasks, plus what to confirm for each one before you accept a quote.

Task	What it covers	What to confirm in a quote
Factory floor cleaning	Cleaning and maintaining factory floors, removing grime, residue and debris.	Whether this is a routine sweep and mop, or extends to stripping and resealing a sealed floor coating.
Warehouse cleaning	Cleaning floor areas, loading docks and racking zones to keep a warehouse clear and safe.	Whether racking and loading-dock areas are priced in, not just open floor space.
Machinery cleaning	Cleaning around and beneath equipment to remove grease and dust buildup without disrupting operations.	Whether machinery needs to be powered down or isolated for the clean, and who arranges that.
High-level cleaning	Elevated rafters, beams, ducting and shelving that accumulate debris in industrial environments.	The access method (ladder, scissor lift, boom lift) and whether it's priced as part of the session or as an extra.
Industrial vacuuming	Extracting fine dust, particles and dry waste from floors and hard-to-reach zones.	Whether the same visit bags the collected dust for disposal, or leaves that for a separate waste-removal task.
Pressure washing	Concrete floors, external yards and hard surfaces, to remove stubborn grime and contamination.	Which surfaces are included, and whether any chemical treatment is a separate line item.
Degreasing services	Applying industrial-strength degreasers to break down oil and grease buildup.	What product is used, and whether it's suited to your floor surface and drainage.
Spill cleanup	Responding to chemical and liquid spills, containing and cleaning the affected area to full WHS compliance.	Whether spill response is included in the standard scope, or only available as a separate call-out.
Waste removal	Managing industrial waste removal, including dry waste and packaging debris.	Whether waste removal is included in the base price, or billed separately by load.

Nine tasks from Merfield Group's published "What is Included" list. The "what to confirm" column is our own buyer guidance based on these tasks, not part of the cited source.

Source: Merfield Group, Industrial Cleaning Services Sydney

The equipment behind the work

The same provider's published fleet includes ride-on scrubbers, sweepers and wet-dry vacuum systems built for large-scale industrial floor cleaning, plus commercial high-pressure washers rated for grime, grease and contamination on concrete, metal and external surfaces.

Source: Merfield Group, Industrial Cleaning Services Sydney

Signs a site needs industrial-scope cleaning

Not every commercial site needs the same crew or equipment. These signals point to industrial rather than standard commercial cleaning:

• Production residue on the floor or surfaces (oil, grease, dust, swarf) that a mop and a standard vacuum will not lift.
• Cleaning has to happen around machinery that is running or has recently stopped.
• Structures above head height (racking, rafters, ducting) have not been cleaned in a while and are shedding debris.
• A spill or contamination event needs documented, WHS-compliant cleanup rather than a general wipe-down.
• The site is regularly inspected against a workplace hygiene standard a domestic-grade clean cannot demonstrate.

Getting a comparable quote

Ask what the session price actually covers before comparing numbers. Every time. A $100 quote and a $400 quote for the same "factory cleaning" line item can describe very different jobs: one a floor sweep and surface wipe, the other a full high-level dust removal with pressure washing and machinery detailing included.

The same principle applies here as when choosing a builders clean contractor: get the scope in writing, and confirm the crew has actually worked industrial sites rather than office or retail cleaning alone. If the quote comes from a commercial cleaning company that also runs a construction division, vetting a cleaner's construction division covers what to check about that setup specifically.

For how the commercial cleaning industry behind these rates is classified and sized nationally, see the Australian cleaning and construction data.